SHZICMY Chain and Binder Kit Ratchet Load Binder 5/16-3/8 10ft Chains Hauling 2X

DESCRIPTION 1

Key Words: 5/16” – 3/8” Chain Binder and 5/16” X 10ft Binder Chains. Transport Chain Safe Working Load. Chains with Grappling Hook. for Tie Down Heavy Loads to a Truck or Flatbed Trailer

Description
The high-quality ratchet binder and chain set made of high-quality 45 steel is ideal for hauling and tying cargo. The upgraded ratchet gears. rings. and hooks not only increase the strength and load-bearing capacity of the product but also extend its service life. Buy this ratchet and chain set to make hauling goods easier and safer.

Details
1. Extended Galvanized Chains: The extended chain (10 feet long) allows for a wider range of hauling of goods. which is more convenient and faster. The surface of the chain is galvanized so that the product has better corrosion resistance and wear resistance. which extends the service life.
2. High-strength Nuts: The nuts are processed with special treatment to make them high-strength and durable. They will not be deformed or damaged even after a long time of use.

Application
They are ideal for strapping. recording. securing. and pulling loads for most industrial applications such as factories. warehouses. garages. and docks.

Specification
Material: 45 Steel
Color: Red. Gold
Hook Rating: G70
Process: Die-forging. Casting. Spraying. Precision Milling
Gross Weight: 19kg/42.22lbs
Package Size: 40*41*9cm/15.75*16.14*3.54in
Rated Pulling Force: 5400lbs
Test Pulling Force: 10.800lbs
Breaking Tension: 19000lbs
Compatible Chain Size: 5/16”-3/8”/8-10 mm
Adjustable Length: 57.5-77.8cm/22-30inch
Handle Length: 35.3cm/14in
Chain Length: 3m/10ft
Chain Diameter: 5/16in/8mm

Package Included
2*Ratchet Binders
2*Chains

Notes
1. Develop good lifting habits. and plan how to hang. lift and unload before the lifting work starts.
2. Make preparations: determine the weight and center of gravity of the object to be lifted and mark the lifting and weight data. Only after the center of gravity is determined can the hook be hung in the proper position.
3. The crane operator should be informed of the weight of the object to be lifted.
4. The crane hook should be hung vertically above the center of gravity of the object to be lifted.
5. The lifting object is to be lifted in such a way as to avoid damage to the lifting object. damage to the rigging itself. rotation. or dropping. The following conditions need to be observed to ensure safe lifting.
5.1 For single-leg rigging. the lifting point should be vertically above the center of gravity of the object being lifted.
5.2 In the case of double-legged rigging. the lifting point should be located on both sides of the lifting object. with the lifting point above the center of gravity.
5.3 In the case of three-legged and four-legged rigging. the lifting point should be evenly located at the level of the center of gravity of the lifted object and above the center of gravity of the object to be lifted.
6. This product is only suitable for binding and tightening. not for high-altitude hoisting.
7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.