1320 lbs Lifting Capacity Magnetic Lifter. Lifting Magnet with Release. Permanent Lift Magnets. Steel Magnetic Lifter for Hoist. Dock. Shop Crane. Block. Board

Specification

• Material: Steel. N42 Magnet. Rubber. Alloy
• Process: Coating. Galvanizing
• Assembly Required: Yes
• Max. Lifting Capacity: 600kg/1320lbs
• Operating Temperature: -40~80??/-40~176 ?H

Notes

• 1. Please clean the surface of the steel plate before use to prevent the magnetic force from decreasing. Please do not use the product on a rough surface.
• 2. Please do not control the handle without a steel plate under the magnetic lifter.
• 3. There are strict requirements on the thickness of steel plate when lifting by the magnetic lifter. For example. when the magnet lifter adsorbs round steel. the adsorption capacity produced by the same magnetic force is about 30% of the flat workpiece. but the maximum is not more than 50%.
• 4. Please note that the lifter should not be used at the edge of the lifter or vertically. and the centerline of the lifter should coincide with the centerline of the lifting object (i.e. balanced lifting).
• 5. It is strictly forbidden to overload (beyond the parameter range) during the lifting process. and it is strictly forbidden to have people under the lifting object. and the operator needs to keep a sufficient safety distance from the lifted object.
• 6. The lifted object should be kept basically stable in the lifting. and impact and large shaking are strictly prohibited.
• 7. The ambient temperature of the product should not exceed 176 ?H. and it is strictly forbidden to contact objects higher than 176 ?H.
• 8. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

• 1320 lbs Lifting Capacity: Built with N42 neodymium magnets. this permanent magnetic lifter can lift 1320 lbs/600 kg loads. It is solid and reliable enough to lift steel sheets. blocks. rods. cylindrical. and other magnetic materials.
• Steel Magnetic Lifter: The design of the rotating shaft is more convenient to control the steel magnetic lifter without the use of electricity (turn to the left/right to open/close the suction).
• U-Shaped Groove: The design of the U-slot at the bottom of the product significantly increases its adsorption area and capacity and makes it have a greater range of use. The clear relationship diagram on the side makes it more convenient and easier to use.
• Wide Application: Suitable for bridge building. dock shipbuilding. machinery lifting. automobile maintenance. power. engineering. transportation and mining for lifting steel plates. blocks. rods. columns. and other magnetic materials.